Coaxial Power Dividers in the 900 MHz band from 806-960 MHz
900 MHz power dividers are tuned across the entire band depending on VSWR specifications. The following table shows the standard models available with custom models also available if you have a non-standard application.
Connector interfaces are flexible based on insertion power. Divisional ports on standard models are equal in phase and amplitude.
900 MHz power dividers are tuned across the entire band depending on VSWR specifications. The following table shows the standard models available with custom models also available if you have a non-standard application.
Connector interfaces are flexible based on insertion power. Divisional ports on standard models are equal in phase and amplitude.
| Frequency Range: | 806-960 MHz |
| Impedance: | 50 ohms |
| Insertion Loss: | <0.1 dB |
| Power Split Ratio | |
| 2-Way: | 50% x 2 |
| 3-Way: | 33.3% x 3 |
| 4-Way: | 25% x 4 |
| 5-Way: | 20% x 5 |
| 6-Way: | 16.6% x 6 |
| 8-Way: | 12.5% x 8 |
| VSWR: | <1.05 per 50 MHz |
| <1.10 entire band | |
| Phase: | 0 Degrees on O/P ports |
| Max CW | Common Connector |
| 0.25 kW: | N female |
| 1.5 kW: | 7-16 female |
| 3 kW: | 7/8 EIA |
| DC Continuity: | Continuity all ports |
| Material | |
| Outer Conductor: | C272 Brass |
| Inner Conductor: | 6082/6061 Aluminum |
| Mounting: | Stainless Steel clamps available |
Specifications are subject to change without notice.